2009 EC300R SETUP
|
||
Move pink carb breather hoses to the front fuel bowl screw to allow access to the air screw. |
Aluminium hard anodized 22mm axle nut. 8mm hex head brake pin |
Stock chamber - Left FMF Gnarly - Right |
Stock chamber - Left FMF Gnarly - Right
|
Quick release seat. Replacement rivet-clip. Installed in 5 minutes!! |
Solid rear disc supplied in spares kit Fitted! |
Wire tied throttle cable to adjuster. Do not just tie it to the rubber sleeve, slipped back in the picture! |
Hard to see but coil has 5 earths (inc an hour meter). I have fitted a right angle bracket on front mount to turn it forward to be hidden. |
Enduro loom from spares kit fitted. Headlight switch fitted with waterproof boot. Optional speedo patch harness not fitted. |